Hot Downloads

×

Notice

The forum is in read only mode.
Welcome, Guest
Username: Password: Remember me
  • Page:
  • 1

TOPIC: static routes

static routes 11 years 5 months ago #21332

hello,

I have setup a site to site vpn. i am having a problem with create routes.

if I add a static route to a laptop via windows as follows:

route add 192.168.1.0 mask 255.255.255.0 192.168.2.1

I am able to ping the other network. I figured that I could just add that static route on the firewall that the site to site vpn is setup on and it would also function the same way but it doesnt. if I add:

route inside 192.168.1.0 255.255.255.0 192.168.2.1 1

none of the machines can see the network. all the machines are using the pix as their default gateway. if i remove the static route from the firewall and re-add the static route back to the windows machine, it functions fine.

any ideas?

Re: static routes 11 years 5 months ago #21342

can you post a diagram of your how you got this implemented.

hello,

I have setup a site to site vpn. i am having a problem with create routes.

if I add a static route to a laptop via windows as follows:

route add 192.168.1.0 mask 255.255.255.0 192.168.2.1

I am able to ping the other network. I figured that I could just add that static route on the firewall that the site to site vpn is setup on and it would also function the same way but it doesnt. if I add:

route inside 192.168.1.0 255.255.255.0 192.168.2.1 1

none of the machines can see the network. all the machines are using the pix as their default gateway. if i remove the static route from the firewall and re-add the static route back to the windows machine, it functions fine.

any ideas?

Re: static routes 11 years 5 months ago #21376

i was able to get it to work by clearing the route table on each laptop (route -f) followed by ipconfig /release and renew. Once this was done the remote office was able to ping and communicate with the main office.
  • Page:
  • 1
Time to create page: 0.134 seconds

CCENT/CCNA

Cisco Routers

  • SSL WebVPN
  • Securing Routers
  • Policy Based Routing
  • Router on-a-Stick

VPN Security

  • Understand DMVPN
  • GRE/IPSec Configuration
  • Site-to-Site IPSec VPN
  • IPSec Modes

Cisco Help

  • VPN Client Windows 8
  • VPN Client Windows 7
  • CCP Display Problem
  • Cisco Support App.

Windows 2012

  • New Features
  • Licensing
  • Hyper-V / VDI
  • Install Hyper-V

Linux

  • File Permissions
  • Webmin
  • Groups - Users
  • Samba Setup