Hot Downloads

Welcome, Guest
Username: Password: Remember me

TOPIC: unable to ping other network on the subnet

unable to ping other network on the subnet 9 years 7 months ago #21239

  • Reymark
  • Reymark's Avatar
  • Offline
  • New Member
  • Posts: 1
  • Karma: 0
Hi,

I setup small network here in our office. i have 3NICS. eth0 network:192.168.60.0 inet:192.168.60.2 bcast:192.168.60.15 subnetmask:255.255.255.240 gw:192.168.60.1 eth1: network 192.168.60.16 inet:192.168.60.17 bcast:192.168.60.31subnetmask:255.255.255.240 eth2:network 192.168.60.32 inet:192.168.60.33 bcast:192.168.60.47 subnet: 255.255.255.240 eht3 network 192.168.60.48 inet:192.168.60.49 bcast: 192.168.60.63 subnet; 255.255.255.240...im running CentOs dhcpd service and config with static dhcp. now i tried to ping .38 host on my linux box it reply. like this .2<<>>.38 ok. fom .38<<>>.2 ok....but frm .38>>>.1 which is the gw. i get request time out. can somebody help me. or tell me what i need to do...
The administrator has disabled public write access.

Re: unable to ping other network on the subnet 9 years 7 months ago #21276

  • Elohim
  • Elohim's Avatar
  • Offline
  • Senior Member
  • Posts: 220
  • Karma: 0
From your information below, I would guess that .2 and .38 are assigned to two nics on the same machine. Hence they would be able to communicated with each other but since .1 is in a different subnetwork than .38, you would not be able communicated between .38 and .1 without some routing setup.
Hi,

I setup small network here in our office. i have 3NICS. eth0 network:192.168.60.0 inet:192.168.60.2 bcast:192.168.60.15 subnetmask:255.255.255.240 gw:192.168.60.1 eth1: network 192.168.60.16 inet:192.168.60.17 bcast:192.168.60.31subnetmask:255.255.255.240 eth2:network 192.168.60.32 inet:192.168.60.33 bcast:192.168.60.47 subnet: 255.255.255.240 eht3 network 192.168.60.48 inet:192.168.60.49 bcast: 192.168.60.63 subnet; 255.255.255.240...im running CentOs dhcpd service and config with static dhcp. now i tried to ping .38 host on my linux box it reply. like this .2<<>>.38 ok. fom .38<<>>.2 ok....but frm .38>>>.1 which is the gw. i get request time out. can somebody help me. or tell me what i need to do...
The administrator has disabled public write access.
Time to create page: 0.073 seconds

CCENT/CCNA

Cisco Routers

  • SSL WebVPN
  • Securing Routers
  • Policy Based Routing
  • Router on-a-Stick

VPN Security

  • Understand DMVPN
  • GRE/IPSec Configuration
  • Site-to-Site IPSec VPN
  • IPSec Modes

Cisco Help

  • VPN Client Windows 8
  • VPN Client Windows 7
  • CCP Display Problem
  • Cisco Support App.

Windows 2012

  • New Features
  • Licensing
  • Hyper-V / VDI
  • Install Hyper-V

Linux

  • File Permissions
  • Webmin
  • Groups - Users
  • Samba Setup