Hot Downloads

Welcome, Guest
Username: Password: Remember me

TOPIC: help with boson simulation

help with boson simulation 9 years 8 months ago #19218

  • Brandonh
  • Brandonh's Avatar
  • Offline
  • Distinguished Member
  • Posts: 81
  • Karma: 0
For some reason i can not get the serverfarm router to ping the S0 interface on Floor 5's router can anyone tell me what the issue is.


serverfarm's serial 1 interface is connected to the FLoor 5 routers serial 1 interface.

serial farms interface serial 1 is 10.0.0.2/24
Floor 5 router's serial 1 interface is 10.0.0.1/24

Theese routers interfaces are able to ping each other. However Floor 5 has a second interface serial 0 in which serverfarm cannot ping.

I set a route from serverfarm ip route 10.5.0.0 255.255.255.0 10.0.0.1

Floor 5 routers serial interface 0 is 10.5.0.1

So im thinking the route goes from server farm to the 10.0.0.1 "floor 5 routers serial 1 interface then from there it should know to go to its serial 0 interface to the 10.5.0.0 subnet any suggestions ?
The administrator has disabled public write access.

Re: help with boson simulation 9 years 8 months ago #19219

  • S0lo
  • S0lo's Avatar
  • Offline
  • Moderator
  • Posts: 1577
  • Thank you received: 7
  • Karma: 3
Can you ping Floor 5 S0 from Floor 5 it self ?

Note that even if the serial 0 is "no shutdown" it has to be connected to be up.
Studying CCNP...

Ammar Muqaddas
Forum Moderator
www.firewall.cx
The administrator has disabled public write access.

Re: help with boson simulation 9 years 8 months ago #19227

  • Dove
  • Dove's Avatar
  • Offline
  • Distinguished Member
  • Posts: 198
  • Thank you received: 1
  • Karma: 2
Hi Brandonh,

Can you pls check whether the Floor 5 ROuter's Serial0 interface is UP....?

Dove
The administrator has disabled public write access.

It works 9 years 8 months ago #19242

  • Brandonh
  • Brandonh's Avatar
  • Offline
  • Distinguished Member
  • Posts: 81
  • Karma: 0
I finally got it to work i had to connect the first router to the last router then add in all of the routes i believe i intered like 66 routes in all.
The administrator has disabled public write access.
Time to create page: 0.078 seconds

CCENT/CCNA

Cisco Routers

  • SSL WebVPN
  • Securing Routers
  • Policy Based Routing
  • Router on-a-Stick

VPN Security

  • Understand DMVPN
  • GRE/IPSec Configuration
  • Site-to-Site IPSec VPN
  • IPSec Modes

Cisco Help

  • VPN Client Windows 8
  • VPN Client Windows 7
  • CCP Display Problem
  • Cisco Support App.

Windows 2012

  • New Features
  • Licensing
  • Hyper-V / VDI
  • Install Hyper-V

Linux

  • File Permissions
  • Webmin
  • Groups - Users
  • Samba Setup