Hot Downloads

×

Notice

The forum is in read only mode.
Welcome, Guest
Username: Password: Remember me
  • Page:
  • 1

TOPIC: cisco 3560 cnfiguration

cisco 3560 cnfiguration 11 years 11 months ago #18081

  • bfk98
  • bfk98's Avatar Topic Author
  • Offline
  • New Member
  • New Member
  • Posts: 2
  • Thank you received: 0
hi all im new to vlans and would appreciate any help given.

my senario is i have multiple tagged vlans and one untagged vlan coming in on one connection to one port of my 3560.
what i wish to do is to split each vlan onto a separate subnet and pipe it out through another port.
this port is conneted to a server which understands these subnets.
it then passes the appropiate dhcp request back to the clients on the appropiate vlan?

how would i configure my 3560 to handle such a situation?

TIA

Re: cisco 3560 cnfiguration 11 years 11 months ago #18089

If i understand your question correctly, you would want to setup both ports as trunk ports(dot1q). The server would also have to support the dot1q.

3560 11 years 11 months ago #18090

  • bfk98
  • bfk98's Avatar Topic Author
  • Offline
  • New Member
  • New Member
  • Posts: 2
  • Thank you received: 0
no the serever understands ip only it sees an ip and nos which subnet it belongs too then replies with the appropiate dhcp lease.
the vlans come from ssids setup on awireless radio
  • Page:
  • 1
Time to create page: 0.122 seconds

CCENT/CCNA

Cisco Routers

  • SSL WebVPN
  • Securing Routers
  • Policy Based Routing
  • Router on-a-Stick

VPN Security

  • Understand DMVPN
  • GRE/IPSec Configuration
  • Site-to-Site IPSec VPN
  • IPSec Modes

Cisco Help

  • VPN Client Windows 8
  • VPN Client Windows 7
  • CCP Display Problem
  • Cisco Support App.

Windows 2012

  • New Features
  • Licensing
  • Hyper-V / VDI
  • Install Hyper-V

Linux

  • File Permissions
  • Webmin
  • Groups - Users
  • Samba Setup