Hot Downloads

Welcome, Guest
Username: Password: Remember me

TOPIC: Implementing VLANs on the Catalyst 2924c-XL

Implementing VLANs on the Catalyst 2924c-XL 10 years 2 months ago #15695

  • Handout
  • Handout's Avatar
  • Offline
  • New Member
  • Posts: 1
  • Karma: 0
I'm stumped.

I'm trying to implement VLANs on my network and am having problems as some of my switches are 2924s. The trouble is they need to be running VTP to set up a trunk. To run VTP they need the Enterprise version of the software. That in itself is not the problem but rather, the enterprise version of the software that I can find does not support trunks.

Does anyone know how to get around this so that I can go forward and implement VLANs?
The administrator has disabled public write access.

Re: Implementing VLANs on the Catalyst 2924c-XL 10 years 3 weeks ago #16763

  • krik
  • krik's Avatar
  • Offline
  • Frequent Member
  • Posts: 69
  • Karma: 0
I don't think you need VTP to setup a trunk. However, if you are trying to setup this trunk in 'auto' or 'negotiated' mode you need to configure the same VTP domain name on both side of the trunk (vtp domain <VTP name>) even if you don't use it.

Hope this helps.
Christophe Lemaire
www.exp-networks.be/blog/
The administrator has disabled public write access.
Time to create page: 0.073 seconds

CCENT/CCNA

Cisco Routers

  • SSL WebVPN
  • Securing Routers
  • Policy Based Routing
  • Router on-a-Stick

VPN Security

  • Understand DMVPN
  • GRE/IPSec Configuration
  • Site-to-Site IPSec VPN
  • IPSec Modes

Cisco Help

  • VPN Client Windows 8
  • VPN Client Windows 7
  • CCP Display Problem
  • Cisco Support App.

Windows 2012

  • New Features
  • Licensing
  • Hyper-V / VDI
  • Install Hyper-V

Linux

  • File Permissions
  • Webmin
  • Groups - Users
  • Samba Setup