Hot Downloads



The forum is in read only mode.
Welcome, Guest
Username: Password: Remember me
  • Page:
  • 1

TOPIC: cisco transparent proxy

cisco transparent proxy 12 years 11 months ago #14144

Hi all,
I am trying to configure a transparent Proxy on my network using a Cisco 2811. I have the ETH0 int facing my internal network and the int S0 facing the public internet.
I have squid running on a server ( , listening on port 80) and I want the Cisco router to send any http request to this server.
I have added the following config to the router:

access-list 110 deny tcp host any eq www
access-list 110 permit tcp any any eq www log

route-map proxyweb permit 10
match ip address 110
set ip next-hop

interface Ethernet0
ip policy route-map proxyweb

After applying this config I used the show route-map and show access list commands and it shows that each rule has several thousand matches. However nothing is getting to my Squid Proxy. Furthermore, everyone is still able to browse inside teh LAN without any problem, so the PBR is not being used at all!
Any and all help will be greatly appreciated.
  • Page:
  • 1
Time to create page: 0.092 seconds


Cisco Routers

  • SSL WebVPN
  • Securing Routers
  • Policy Based Routing
  • Router on-a-Stick

VPN Security

  • Understand DMVPN
  • GRE/IPSec Configuration
  • Site-to-Site IPSec VPN
  • IPSec Modes

Cisco Help

  • VPN Client Windows 8
  • VPN Client Windows 7
  • CCP Display Problem
  • Cisco Support App.

Windows 2012

  • New Features
  • Licensing
  • Hyper-V / VDI
  • Install Hyper-V


  • File Permissions
  • Webmin
  • Groups - Users
  • Samba Setup