Hot Downloads

Welcome, Guest
Username: Password: Remember me

TOPIC: ISP Backbone simulation

ISP Backbone simulation 10 years 9 months ago #13147

  • pp1dt
  • pp1dt's Avatar
  • Offline
  • Frequent Member
  • Posts: 22
  • Karma: 0
Is there a way to configure the cisco1841 with 2 F/Ethernet ports to simulate two public IP come from 2 different ISP (different subnet).

I actually want to use two more router to connect to these public IP and configure LAB test for site-2-site and remote access vpn, thanks for any advise..
:roll:
The administrator has disabled public write access.

Re: ISP Backbone simulation 10 years 9 months ago #13153

  • havohej
  • havohej's Avatar
  • Offline
  • Distinguished Member
  • Posts: 152
  • Karma: 0
Hi.

of course you can, I understand you simply want to put public ip address to a two fastethernet 1841 router interfaces and connect other routers respectively to each 1841 ethernet interface to route encrypted traffic.
of course you can because it is a lab you can also mix the routing of private and public network adressing.
The administrator has disabled public write access.

Re: ISP Backbone simulation 10 years 9 months ago #13155

  • pp1dt
  • pp1dt's Avatar
  • Offline
  • Frequent Member
  • Posts: 22
  • Karma: 0
yes, but how? if I configure static route on these 3 router then it become a whole logical network, both end private subnet behind the edge router all can see eachothers.

what I want is to simulate the two public IP come the 1841 F/Ethernet interface like its come from the Public Internet (something like it come from two different ISP), possible ?
The administrator has disabled public write access.
Time to create page: 0.073 seconds

CCENT/CCNA

Cisco Routers

  • SSL WebVPN
  • Securing Routers
  • Policy Based Routing
  • Router on-a-Stick

VPN Security

  • Understand DMVPN
  • GRE/IPSec Configuration
  • Site-to-Site IPSec VPN
  • IPSec Modes

Cisco Help

  • VPN Client Windows 8
  • VPN Client Windows 7
  • CCP Display Problem
  • Cisco Support App.

Windows 2012

  • New Features
  • Licensing
  • Hyper-V / VDI
  • Install Hyper-V

Linux

  • File Permissions
  • Webmin
  • Groups - Users
  • Samba Setup