Skip to main content

design and implementation of network segment of 3 vlan

More
12 years 11 months ago #36742 by lmcares4u2003
i was given this as a project topic , i need ur help too, please put me through, i need your idea, what to do?
More
12 years 11 months ago #36750 by S0lo
If you could elaborate on the requirements and the evironment of the project it would help us help you.

Studying CCNP...

Ammar Muqaddas
Forum Moderator
www.firewall.cx
More
12 years 11 months ago #36770 by lmcares4u2003
with the little idea i have about networking, i have downloaded some material about the project, the supervisor said i should forget about using the cisco swicth, and is the only cisco swicth that can be use to create a VLAN, now he said i should normal 8port switch and then go ahead with the project. it is an undergraduate project(finalist).
pls replyyyyyyyy
More
12 years 11 months ago #36771 by S0lo
Here is a quicky starter network with 3 subnets, one for each switch. The whole network is connected to single router as you can see. Each switch is connected to a certain department or sector of the company.

img01.imagecanon.com/full_view.php?view=29458_3subnets.jpg

The first thing you want to do after setting up the devices is to assign different and valid IP address ranges for each subnet.

Studying CCNP...

Ammar Muqaddas
Forum Moderator
www.firewall.cx
More
12 years 11 months ago #36785 by rizin
Your image is Missing S0lo

Known is a drop, unknown is an Ocean
More
12 years 11 months ago #36789 by S0lo

Your image is Missing S0lo


Thanks rizin, I've replaced the link. For some reason the [img] code didn't work.

Studying CCNP...

Ammar Muqaddas
Forum Moderator
www.firewall.cx
Time to create page: 0.156 seconds