Articles Tagged ‘Serial connector’

Serial Direct Cable Connection, DB9, DB25, COM Ports and Pinouts

This article covers the popular serial ports on workstations, servers and laptop computers. We cover serial data transfer, port pinouts, port speeds, serial interface types (DB9 & DB25), null modem cables and much more.

The Serial Direct Connection is the one which utilizes the COM ports of your computers. Every computer has at least two COM ports, COM1 and COM2. The "COM" stands for "Communications". Its pinouts are a lot simpler when compared to the parallel port, but the speed is also a lot slower.

To give you an idea of how fast (or slow) a serial port is, at its best you will get around 12 to 14 KB per second. That's pretty slow when you're used to a network connection, but let me show you how serial data is transferred so you can also understand why it's a lot slower:

Transfer of data via serial port

Figure 1. Transfer of data via serial port

 

The above picture gives you an idea on how serial data is transferred. Each colored block that is numbered is sent from PC 1 to PC 2. PC 2 will receive the data in the same order it was sent, in other words it will receive data block 1 first and then 2, all the way to block 7. This is a pretty good representation of data flow in a serial cable. Serial ports transmit data sequentially over one pair of wires (the rest of the wires are used to control the transfer).

Another way you can think of it is like a one lane road where the road is wide enough to only fit one car at a time (one data block at a time in our example above) so you would imagine that the road cannot process several cars at one time.

The Serial Port

Most new computers have two COM ports with 9 pins each; these are DB-9 male connectors. Older computers would have one DB-9 male connector and one DB-25 male connector. The 25 pin male connector is pretty much the same as the 9 pin, it's just bigger.

Let's have a look at a serial port to see what we are talking about:

Physical Serial interface - DB-9 (usually COM1) and DB-25 (usually COM2)

Figure 2. Physical Serial interface - DB-9 (usually COM1) and DB-25 (usually COM2)

Different pinouts are used for the DB-9 and DB-25 connectors and we will have a look at them in a moment. Let's just have another quick look at the COM ports of a new computer:

cabling_dcc3

Figure 3. Serial ports (COM1 & COM2)

Notice the COM ports, they are both DB-9 connectors, there is no more DB-25! The connector above the two blue COM ports is an LPT or Parallel port.

Articles To Read Next:

CCENT/CCNA

Cisco Routers

  • SSL WebVPN
  • Securing Routers
  • Policy Based Routing
  • Router on-a-Stick

VPN Security

  • Understand DMVPN
  • GRE/IPSec Configuration
  • Site-to-Site IPSec VPN
  • IPSec Modes

Cisco Help

  • VPN Client Windows 8
  • VPN Client Windows 7
  • CCP Display Problem
  • Cisco Support App.

Windows 2012

  • New Features
  • Licensing
  • Hyper-V / VDI
  • Install Hyper-V

Linux

  • File Permissions
  • Webmin
  • Groups - Users
  • Samba Setup